Adhesive Anchors
adhesive-anchors
Available Sizes:
/Asset/ac100.png
Available Sizes:
/Asset/PE1000.png
/Asset/chemstud.png
Powers AC100+ Gold Adhesive Anchoring System
(3) The AC100+Gold is a two-component vinylester adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The AC100+Gold is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in concrete and masonry base materials.Available Sizes:
- 10oz
- 12oz
- 28oz
/Asset/ac100.png
Powers PE1000+ Adhesive Anchoring System
(3) The PE1000+ is a two-component, high strength epoxy adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. The PE1000+ is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in solid concrete base materials.Available Sizes:
- 13oz
- 20oz
- 47oz
/Asset/PE1000.png
Powers Chem-Stud Spin-In Type Capsule Adhesive
The Chem-Stud Anchor System consists of self contained two-part glass capsules and matching chisel pointed anchor rods which are installed using a rotary hammer drill and rod adapters. The Chem-Stud adhesive is an ester based resin material packaged in a single use glass capsules designed for installation of 3/8” through 1-1/2” threaded rods in solid concrete and masonry materials. It can also be used with chisel pointed reinforcing bars| Rod Size | Drill Diameter | Length |
| 3/8” | 7/16” | 3-1/2” |
| 1/2” | 9/16” | 4-1/4” |
| 5/8” | 11/16” | 5” |
| 3/4” | 7/8” | 6-5/8” |
| 7/8” | 1” | 7” |
| 1” | 1-1/8” | 8-1/4” |
| 1-1/4” | 1-1/2” | 10-1/4” |
