Railguard 200 Fit Rite Series
ety-perimeter-safety-railguard-200-fit-rite-series
straight fit rite.png
inclined fit rite.png
curved fit rite.png
Comes in Yellow or Galvanized
crossover.png
Comes in Yellow or Galvanized
long T-connector.png
Comes in Yellow or Galvanized
T-connector.png
Comes in Yellow or Galvanized
split t.png
Comes in Yellow or Galvanized
90 degree.png
Comes in Yellow or Galvanized
straight sleeve.png
Comes in Yellow or Galvanized
swivel joint.png
FR baseplate.png
s5u-clamp.png
st-clamp.png
Straight Stanchions
(8) The latest in Passive Fall Protection from Garlock offers complete customization to fit any rooftop, mezzanine or loading dock.| End Kits Include: | Mid Kits Include: | |
| •1-Stanchion | •1-Stanchion | |
| •1-Locking Pin | •1-Locking Pin | |
| •1-Elbow(90 Derees) Fitting | •1-Short Tee Fitting | |
| •1-Cross-Over Fitting | •1-Cross-Over Fitting | |
| •1-End cap |
Inclined Stanchions
(8) The latest in Passive Fall Protection from Garlock offers complete customization to fit any rooftop, mezzanine or loading dock.| End Kits Include: | Mid Kits Include: | |
| •1-Stanchion | •1-Stanchion | |
| •1-Locking Pin | •1-Locking Pin | |
| •1-Elbow(90 Derees) Fitting | •1-Short Tee Fitting | |
| •1-Cross-Over Fitting | •1-Cross-Over Fitting | |
| •1-End cap |
Curved Stanchions
(8) The latest in Passive Fall Protection from Garlock offers complete customization to fit any rooftop, mezzanine or loading dock.| End Kits Include: | Mid Kits Include: | |
| •1-Stanchion | •1-Stanchion | |
| •1-Locking Pin | •1-Locking Pin | |
| •1-Elbow(90 Derees) Fitting | •1-Short Tee Fitting | |
| •1-Cross-Over Fitting | •1-Cross-Over Fitting | |
| •1-End cap |
Cross-Over Fitting
(2) One (1) Cross-Over Fitting for Garlock Fit Rite railsComes in Yellow or Galvanized
Long Tee Fitting
(2) One (1) Long Tee Fitting for Garlock Fit Rite railsComes in Yellow or Galvanized
Short Tee Fitting
(2) One (1) Short Tee Fitting for Garlock Fit Rite railsComes in Yellow or Galvanized
Split Tee Fitting
(2) One (1) Split Tee Fitting for Garlock Fit Rite railsComes in Yellow or Galvanized
90 Degree Elbow
(2) One (1) 90° Elbow for Garlock Fit Rite railsComes in Yellow or Galvanized
Straight Sleeve
(2) One (1) Straight Sleeve for Garlock Fit Rite railsComes in Yellow or Galvanized
In-Line Swivel
(2) One (1) In-Line Swivel for Garlock Fit Rite railsComes in Yellow or Galvanized
Metal Deck Plate
(3)- Metal Deck Plates for the Fit Rite System
- Comes in 3 different sizes
S-5-U Clamp
- Each box includes a bit tip for tightening setscrews using an electric screw gun
- A structural aluminum attachment clamp
- The S-5-U is compatible with most common metal roofing materials excluding copper
- All included hardware is stainless steel.
S-5-T Clamp
The S-5-T clamp is specially developed to fit profiles having a “T” shaped seam configuration. It will also work on architectural “single-fold,” or “angle-seam” profiles having a horizontal projection of 5/8” or less. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam.
