Light Duty Anchors
light-duty-anchors
/Asset/Scru-Lead.png
Available Size:
Available Sizes:
Available Sizes:
Available Sizes:
Thank you!
Available Sizes:
3/16" x 7/8"
1/4" x 1-1/4" up to 3"
/Asset/Zamac.png
Scru-Lead Wall Anchors
(6)The Scru-Lead anchor is designed for use with sheet metal or wood screws in concrete, block or brick. Made entirely of lead alloy which is soft enough for easy installation, yet hard enough to give holding strength, the performance of this product is dependent on the integrity of the base material.
Bantam Plug Plastic Wall Anchor
(4) The Bantam Plug is a plastic anchor designed for use with lightweight fixtures. It can be used in concrete, block and brick. It is also suggested for use in wallboard. Holding values in wallboard tend to be inconsistent, whereas, other Powers products may be more appropriate. The Bantam Plug anchor is injection molded from an engineered plastic and is designed to be used in conjunction with a sheet metal or wood screw. The Bantam Plug is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.Available Size:
- #6-8 x 3/4"
- #8-10 x 7/8"
- #10-12 x 1"
- #14-16 x 1-1/2"
Fluted Plastic Wall Anchor
(5) The Fluted Plastic Anchor is designed for light duty fastening applications in concrete, block, brick or stone. The body of the Fluted Plastic anchor is injection molded from a ductile plastic and is designed to be used with sheet metal or wood screws. The load capacities for this product depend on the integrity of the base material in which it is installed. The anchor is recommended for light duty static applications where holding power is not a critical factor. It should not be used overhead.Available Sizes:
- #4-6 x 1"
- #10-12 x 1"
- #10-12 x 1-1/4"
- #10-12 x 1-1/2"
- #14 x 1-1/2"
Hollow Wall Anchor
(4) The Plastic Strap-Toggle is pre-assembled anchor consisting of a carbon steel wing and a locking cap / ratchet leg assembly molded from engineered plastic. When compared to traditional toggles, this unique anchor can be installed through a smaller hole and does not require a fixture or screw to set in the base material.Available Sizes:
- 3/16" x 4"
- 1/4" x 4"
- 3/8" x 4"
- 1/2" x 4"
Sharkie Plastic Wall Anchor
(3) The Sharkie wall anchor is engineered for strength - the screw extrudes and compresses the anchor polymer into the wall under tremendous pressure. The anchor molds and conforms exactly to the surface of the hole. All of the forces supported by the screw are transmitted outwardly 360° providing greater holding power by distributing the force over the maximum area possible.Available Sizes:
- #4-#10
- #6-#12
- #8-#14
Zamac Nailin
Please call 1-800-243-3418 or email us at Sales@profastinc.com for more ordering information regarding sizes, types, and brands.Thank you!
Available Sizes:
3/16" x 7/8"
1/4" x 1-1/4" up to 3"
/Asset/Zamac.png
