• Furnish and install the Portals Plus Medium Pipe Boot at all points whereany projection penetrates the roof system, and is less than 6" in diameter.
  • The Medium Pipe Boot shall include 60 mil EPDM or NEOPRENE compression molded body and shall include 70 mil PVC (Polyvinyl Chlo-ride) or TPO (Thermoplastic Olefin) injection molded body.
  • The Medium Pipe Boot shall also include Portals Plus' Snaplock Clamp.
  • Whenever necessary utilize Portals Plus Adapters to seal to square tubing and angle iron and for round penetrations less than 1" in diameter.
  • Attachment of Medium Pipe Boot to roof system shall be done in accordance with Portals Plus Installation Instructions and the roofing membrane manufacturer's requirements.
  • Use white or black as necessary.
portalsplus logo
Unit of Measure


N/A 1-6"


N/A PortalsPlus

Part No.

N/A RFGAD-PB-42510